CAD model selection


Company	MÄDLER
Description	MAE-EL-KPL-RNK-KLNA - Elastic Couplings RNK, backlash-free, with clamps
Bill of material	60541919
ARTNR Product No.	60541919 60541919
WEBSHOP Link Webshop	Product details / Catalogue page / Assembly instructions
MATK Material Short description	Aluminium
MAT Material	Coupling hubs: Aluminium, Plastic spider (insert): Polyurethane, Shore hardness 98ºA (red) Coupling hubs: Aluminium, Plastic spider (insert): Polyurethane, Shore hardness 98ºA (red)
HW Note	- -
BG Size	19 19
DM max. Torque	32 32	Nm
B Bore d - H7 1) -Standard bores (both sides)	19 19	mm
MAXB max. Bore 2) - Different bores (even one-sided) as well feather keyways, available against surcharge	22 22	mm
BX1 Bore d - H7 adjustable		mm Enter value for BX1 Bore d - H7 adjustable mm cm inch ft
BX2 Bore d - H7 adjustable		mm Enter value for BX2 Bore d - H7 adjustable mm cm inch ft
DH DH 3) - Follow the breakdown Ø as per the table below (screw head protrudes over diameter DH)	40 40	mm
L	66 66	mm
LL l	25 25	mm
E	16 16	mm
MVW maximum misalignment 4) - Angular / Maximal values are mutually exclusive	0.9 0.9	Grad
MVR maximum misalignment 4) - Radial / Maximal values are mutually exclusive	0.06 0.06	mm
MVA maximum misalignment 4) - Axial / Maximal values are mutually exclusive	+1.2/-0.5 +1.2/-0.5	mm
DZ max. Speed 5) - Above 30m/s, dynamic balancing is required	10000 10000	1/min
GEW Weight approx.	150 150	g
TKN TkN - Torque 1)	17.0 17.0	Nm
TKMAX max. Tk - Torque 1)	34.0 34.0	Nm
SG Screw size DIN 912	6.0 6.0	mm
AM Tightening torque	11.00 11.00	Nm
STD Interference diameter 2) - Screw head protrudes past diameter DH	47.0 47.0	mm
DFST Torsional Stiffness static	860.0 860.0	Nm/rad
DFD Torsional Stiffness stiffness	2580 2580	Nm/rad
TRHM Moment of inertia 3) - Each one calculated with the max. bore	36.000 36.000	10^-6kgm²
CTN Customs tariff number	84836080